ALOS-SILI-134

Ingredient Information

Polysiloxane containing hydrophobic particles.

ALOS-SILI-134

Key Features

Physical and Chemical Parameters

Applications

It is suitable for electronic potting adhesives, epoxy floor coatings, screen printing inks, UV inks, unsaturated polyester systems, and more.

Usage

• Recommended dosage: 0.01-1.00% of the total formulation.
• For optimal defoaming results, add before grinding or stirring.
• For transparent systems, compatibility should be tested.
• Due to high active content, pre-dilution with aromatic solvents to 10% is advised before adding.
• To prevent sedimentation of hydrophobic particles, use the diluted product immediately.
• The product exhibits thixotropic properties, with viscosity potentially increasing over time or in low-temperature conditions. Stir well before use to ensure proper performance.

Packaging

Available in 25L plastic drums or 200L plastic drums. Custom packaging is available upon request.

Transportation, Storage and Shelf Life

• Transport as non-hazardous chemical.
• Store in a cool, dry, and sealed environment.
• Shelf life: 12 months.
• If storage time exceeds the recommended period, test the product's properties before use.

*The technical parameters provided here are typical values for reference only and do not constitute a product acceptance standard. They are subject to change without prior notice. Due to variations in usage conditions, we cannot guarantee the product's correctness or suitability for specific applications and accept no liability for any direct, indirect, or incidental losses resulting from its use. Users are advised to conduct relevant tests or consult our technical team before application.